POLE QUANTITY |
2 |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
10.0 AMPERES DC ALL LOCATIONS |
CIRCUIT PROTECTION TYPE |
OVERCURRENT ALL LOCATIONS |
TERMINAL TYPE AND QUANTITY |
4 THREADED STUD |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
50.0 DC ALL LOCATIONS |
TRIP RELEASE METHOD |
MAGNETIC ALL LOCATIONS |
TRIP RELEASE CHARACTERISTIC |
TIME DELAY ALL LOCATIONS |
RESET METHOD |
MANUAL |
BODY STYLE |
MULTIPOLE-MULTIPLE ACTUATOR TYPE |
CASE MATERIAL |
PLASTIC |
MOUNTING FACILITY TYPE AND QUANTITY |
4 THREADED HOLE |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
2000.0 DC ALL LOCATIONS |
INTERNAL TRIP RELEASE CONFIGURATION |
SERIES TRIP ALL LOCATIONS |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
0.130 MINIMUM AT 200 PCT AND 1.400 MAXIMUM AT 200 PCT ALL LOCATIONS |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
125.0 ALL LOCATIONS |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
BODY LENGTH |
2.530 INCHES MAXIMUM |
BODY WIDTH |
1.500 INCHES NOMINAL |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
1.660 INCHES MINIMUM AND 1.960 INCHES MAXIMUM |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH |
0.750 INCHES NOMINAL |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
2.046 INCHES MINIMUM AND 2.078 INCHES MAXIMUM |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.750 INCHES NOMINAL |
BOSS HEIGHT |
0.140 INCHES NOMINAL |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
2.800 INCHES MAXIMUM |
THREAD SERIES DESIGNATOR |
UNC |
NOMINAL THREAD SIZE |
0.138 INCHES |
THREAD QUANTITY PER INCH |
32 |
THREAD PITCH DIAMETERS |
0.1177 TO 0.1214 INCHES |
MANUAL ACTUATOR TYPE AND QUANTITY |
2 TOGGLE |
ACTUATOR FUNCTION |
TRIP-RESET |
ACTUATOR POSITION DESIGNATION |
AT EACH POLE |
EXTERNAL ACTUATOR LINKAGE ARRANGEMENT |
ONE AND TWO LINKED |
AUXILIARY SWITCH FUNCTION AND QUANTITY |
1 ALARM |
SWITCH LOCATION AND POSITION DESIGNATION |
INTERNAL AT POLE ONE |
SWITCH CONTACT ARRANGEMENT |
SINGLE POLE, DOUBLE THROW |
SWITCH CURRENT RATING AND TYPE IN AMPS |
10.0 AC AND 2.0 DC |
SWITCH VOLTAGE RATING AND TYPE IN VOLTS |
250.0 AC AND 50.0 DC |
SWITCH TERMINAL TYPE |
KNIFE BLADE |
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED |
FUNGUS RESISTANT AND MOISTURE RESISTANT AND SALT SPRAY PROOF AND SHOCK RESISTANT AND VIBRATION RESISTANT |
TEST DATA DOCUMENT |
81349-MIL-C-55629 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
SPECIFICATION/STANDARD DATA |
81349-MIL-C-55629/4 GOVERNMENT SPECIFICATION |
III ARC QUENCHING METHOD |
MAGNETIC BLOWOUT |
III STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
III SPECIAL HANDLING FEATURE |
MAGNETIC |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
MANUFACTURERS CODE |
81349 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MIL-C-55629/4 |
MANUFACTURERS CODE |
81349 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M55629/4-079 |